Introduction; Proper Use; Features And Equipment - Parkside 75273 Operation And Safety Notes

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
V ~
Volt (AC)
W
Watts (Effective power)
Direct current
(Type of current and voltage)
n
Design no-load speed
0
mA
Milliamps / Amps / Amp-hours
A / Ah
Safety class II
Observe caution and safety notes!
Risk of explosion!!
Modelling and engraving set
PMGS 12 B2
Introduction
Q
We congratulate you on the purchase of
your new device. You have chosen a
high quality product. The instructions for
use are part of the product. They contain important
information concerning safety, use and disposal.
Before using the product, please familiarise yourself
with all of the safety information and instructions
for use. Only use the unit as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.
6 GB/IE
Keep children away from electrical
power tools!
Caution – electric shock!
Danger to life!
For indoor use only!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Avoid contact with rapidly
rotating tools!
Risk of fire!
Proper procedure and handling.
Dispose packaging and appliance in
an environmentally-friendly way!

Proper use

Q
The small drill is to be used for drilling, milling, en-
graving, polishing, cleaning up, grinding, separating
and sawing of wood, metal, plastic, ceramic or stone
in dry rooms. Any other use or modification to the
drill / grinder shall be considered as improper use
and could give rise to considerable dangers. The
manufacturer will not accept liability for loss or
damage arising from improper use. Not intended
for commercial use.

Features and equipment

Q
Small drill:
Rotational speed control
1
ON / OFF switch
2
Metal stirrup hanger
3
Plug for mains adapter
4
Clamping nut
5