Saving The Programme Settings; Loading Laundry; Installing The Auxiliary Dispenser Compartment For Liquid Detergent; Using The Auxiliary Deter- Gent Dispenser Compart- Ment - Siemens XQG100-WM14U7B0HW User Manual

Table of Contents

Advertisement

en operation
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
Press and hold
3 seconds.
Press
⁠   收藏 to call up the saved
programme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Note: To prevent creasing, take note
of the maximum load for the
→ "Programmes", Page 26.
Requirement: The laundry is pre-
pared.
→ "Laundry", Page 30
Open the door.
1.
Make sure that the drum is empty.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.6 Installing the auxiliary
dispenser compartment
for liquid detergent
If you ordered the auxiliary dispenser
compartment as an accessory, you
need to install it.
Pull out the detergent drawer.
1.
32
⁠   收藏 for approx.
Install the auxiliary dispenser com-
2.
partment.
Push in the detergent drawer.
3.
Note: Avoid using thick liquid deter-
gents.
13.7 Using the auxiliary deter-
gent dispenser compart-
ment
You can use the auxiliary dispenser
compartment in the detergent drawer
in order to better control the amount
of laundry detergent.
Pull out the detergent drawer.
1.
Pour laundry detergent into the
2.
auxiliary dispenser compartment.
Do not exceed the maximum mark
on the auxiliary compartment.
Push in the detergent drawer.
3.
13.8 Adding detergent and
care product
Note: Observe the information about
detergents and care products
→ Page 31.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 19
If required, add the care product.
3.
Push in the detergent drawer.
4.

Advertisement

Table of Contents
loading

Table of Contents