Siemens XQG100-WM14U7B0HW User Manual page 45

Table of Contents

Advertisement

Fault
"E:30/-20"
The appliance is not
working.
The programme does
not start.
The door cannot
be opened.
Cause and troubleshooting
Solenoid valve defective.
Call the after-sales service.
→ "Customer Service", Page 53
Detergent dosage is too high.
Reduce the amount of detergent for the next wash-
ing cycle with the same load.
Additional water is added.
Do not add any extra water to the appliance while it
is operating.
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other
appliances are working.
You have not pressed 
Press
.
Door is not closed.
Close the door.
1.
Press
to start the programme.
2.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 34
+ / - is activated.
Check whether + / - is activated.
→ "Buttons", Page 23
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
to start the programme.
4.
The temperature is too high.
Wait until the temperature has dropped.
→ "Cancelling the programme", Page 33
Water level is too high.
Select a suitable programme for draining.
→ "Programmes", Page 26
Power failure.
Troubleshooting en
.
45

Advertisement

Table of Contents
loading

Table of Contents