Advertisement
PRODUCT FEATURES
Sensor (CCD)
1/3"Panasonic CCD .
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get a high definition picture in low Lux condition.
* Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The AES speed
can reach 1/100,000s.
* Gamma Characteristic
Camera Gama characteristic is 0.45.
* Night-time Vision
0 Lux with IR LED ON.
Power Supply Notes：
●The power supply must be regulated 12V supply.
●The operating temperature must be within camera's specifications.
●For better image quality, the cable length for power and video output
should not be excessively long.
CONNECTING
Monitor
TROUBLESHOOTING
1. No picture after providing power
. Check the power supply voltage, it may be outside specification.
. Please check the connecting cables and monitors to determine if the
camera is connected correctly or not.
2. The picture has flowing interference ripples
. Check the ground of the monitor and other peripheral equipment that
are being used is the same ground as the camera.
3. The background color continuously changes
. A fluorescent bulb's electromagnetic field can cause a color roll. This is
a proper phenomenon of the camera.
. To improve the image, try to increase the distance between the camera
and the bulb, or change the angle such that it doesn't face the flores-
cent bulb.
INTRODUCTION
Congratulations on your purchase of this Speco prod-
uct. This camera utilized the latest in SONY sensors
and
drivers.
this camera are weather-resistance, day & night fea-
Video
ture, and indoor & outdoor applications. This product
is a great addition to your CCTV system.
12V DC
Please read this manual carefully to ensure proper
use of the product.
DC12V Power Supply
Link wire rule：
Video
Power
SHOCK
CAUTION:
The most appealing characteristics of
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
The symbol is intended to alert the user to the presence of
uninsulated 'dangerous voltage' within the product's
enclosure that may be of sufficient magnitude to consti-
a risk of electric shock to persons.
CAUTION:
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
To prevent electric shock and risk of fire hazards,
do NOT use anything other than the specified power
Installation Precautions:
● Do not install the camera to extreme temperature condi-
tions. Only use the camera under conditions where tem-
perature is between 14f and 122f.
● Never keep the camera pointed directly at the sun or a
bright object.
● Do not mount the camera near a radiator or heater.
Advertisement
