Commissioning (Figure 28); Network Configuration (Figures 29 - 32) - Desert Aire CM3554 Series Operation Manual

Table of Contents

logged in for 30 minutes after the password is entered. During this

time, the Login screen reads "Still Logged In – Press Prg to Enter". To

press the Prg key.

2.3.3.1 Commissioning (Figure 28)

Selecting COMMISSIONING from the Service Menu displays

the COMMISSIONING MENU. This menu allows the operator

to access the NETWORK CONFIG, SYSTEM CAPACITY,

TIMER SETTINGS, SUPPLY FAN SETUP, and BMS SETUP

menus. If enabled, this screen also allows access to the CO

SETUP menu.

To return to the MAIN MENU, press the Esc key.

Figure 28

To return to the Service Menu, press the Esc key.

Selecting NETWORK CONFIG from the

Commissioning Menu displays the screen shown in

Figure 29. This screen allows the network addressing

to be set. If a static IP address is required, set DHCP

to OFF and enter the Static values. The Mask,

Gateway (GW) and DNS addresses need to be set

as well. If a DHCP service is available, leave the

DHCP setting to On and the service will assign an IP

address.

Desert Aire - CM3554 Operation Manual - 462CE 2023/05 – www.desert-aire.com

Table of Contents