Samsung SC-56C Instruction Manual page 100

■ Disconnecting Wi-Fi Direct
1
From the Home screen,
"Wi-Fi"
2
→ "Wi-Fi Direct"
3
Tap a device name to disconnect
NFC/Osaifu-Keitai settings
You can lock the Osaifu-Keitai function, do mobile payment, read/write the
NFC tag.
1
From the Home screen,
"NFC/Osaifu-Keitai settings"
2
Tap an item to set
Item
NFC/Osaifu-Keitai Lock NFC/Osaifu-Keitai function.
Lock ON/OFF
Contactless Set whether to enable the service that can be
payments used holding over a reader, such as Osaifu-Keitai
compatible service.
Airplane mode
Disable all wireless connections.
1
From the Home screen,
"Airplane mode"
2
Information
• Alternatively, tap on the notification panel to switch setting.
• If you enable "Airplane mode", Wi-Fi, Bluetooth, etc. turn OFF. However,
you can turn them ON again during Airplane mode.
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
Description
→ "Settings" → "Connections" →
Mobile networks
Access point for connecting the Internet (spmode.ne.jp) is already
registered. You can add or change it if necessary.
For details on sp-mode, refer to NTT DOCOMO website.
https://www.nttdocomo.co.jp/service/spmode/ (In Japanese only)
■ Checking the access point in use
1
From the Home screen,
"Mobile networks" → "Access Point Names"
■ Setting an access point additionally
1
From the Home screen,
"Mobile networks" → "Access Point Names" → "Add"
2
"Name" → Enter a name of network profile to create → "OK"
3
"APN" → Enter the access point name → "OK"
4
Enter the other items required by the network operator
• Do not change "MCC" other than 440 and "MNC" other than 10,
respectively. If they are changed, they are not displayed on the
screen.
5
→ "Save"
Information
• When you changed settings of MCC or MNC and access points
are not displayed, initialize the access point or set an access point
manually.
■ Initializing an access point
By initializing an access point, the settings return to the default state.
1
From the Home screen,
"Mobile networks" → "Access Point Names"
2
→ "Reset to default" → "Reset"
98
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
Settings