12.28
Installing the main silencer
12.29
Cleaning the spark arrestor
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Soot particles accumulate on the screen of the spark arrestor over time.
This changes the performance characteristics.
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
p. 65)
–
Remove the right side cover. (
–
Remove main silencer. (
SERVICE WORK ON THE CHASSIS 12
Main work
–
Position the catalytic converter in the main silencer.
S02101-10
–
Position the main silencer.
–
Mount screws
–
Attach spring
Spring hook (50305017000C1)
–
Tighten screws
Guideline
Remaining screws,
chassis
F03475-11
Finishing work
–
Install the right side cover. (
–
Mount the seat. (
–
Install the air filter box cover. (
p. 67)
p. 69)
p. 70)
1
, but do not tighten yet.
2
.
1
.
M6
10 Nm (7.4 lbf ft)
p. 70)
p. 66)
p. 67)
71