Marking Events - Raymarine GPS 11 User Manual

Chapter 3: Getting Started
SERIAL OUTPUT:
Options are: NMEA182, NMEA183,
WAYPOINT (for PC waypoint communication)
SERIAL INPUT:
Options are: DIFFERENTIAL (for differential receiver input),
WAYPOINT (for PC waypoint communication)
Note: Specifications of the NMEA sentences are given in
Appendix B of this manual.

3.7 Marking Events

Pressing the EVENT button on the GPS11 enters the current position
into the memory as a waypoint.
The display will show the position information.
Event01
The event is automatically given the name 'WPT XXX' where XXX
is the next available number. Highlighting SAVE on the menu bar
will save the Event as a waypoint which will appear in the waypoint
list (see page 34).
It is possible to edit any of the Event data by using the trackpad to
highlight the relevant piece of information and pressing the
ENTER button. It is also possible to save the information as shown
and edit later using the Modify Waypoint facility described on
page 34).
Time and date of
EVENT automatically
entered as a comment
25