Raymarine E120W Installation Manual page 41

Chapter 3: Installation
... to replace a Raymarine Pathfinder Display
Part No
E55069
Pedestal adaptor cable
To display
The array and the display should be connected using the pedestal adaptor cable as
shown:
Pedestal adaptor cable
(2.5 metres)
Connecting to a radome
If you are using a radome this can be powered through the display, run your cable and
connect it to the radome and the display.
Part No.
E55065
E55066
E55067
E55068
Description
2.5m Pedestal adaptor cable
To power
Open Array
Power to open array
Boats DC
Power Supply
Cable length
15m
25m
10m
15m
E-Series Display
Power to display
Note: The power supply for both the display
and the open array must be of the same
voltage (using a convertor if necessary) and
from a common supply source e.g. the same
battery or power breaker.
Weight Radome power output
Heavy 2Kw or 4 Kw
Heavy 2Kw or 4 Kw
Light 2kw
Light 2kw
35
To open array
connector
D7327-1
PAGE
ACTIVE
WPTS
MOB
DATA
MENU
OUT
RANGE
IN
OK CANCEL
D7328-1