Overview - KERN EWJ 300-3H Operating Manual

8.3 Overview

Factory settings are marked by *.
Menu block Menu item
F1 Unt
Weighing Units
EL AU*
F2 bl
Display
EL on
background
illumination
EO oFF
F3 Com
Interface S 232
parameter
S USb
32
Available settings / explanation
Not documented
Automatic background illumination on when
weighing pate is loaded or key pressed.
Background lighting of display is switched on
permanently
Display background illumination off
Use to select interface: RS232 or USB
•
P Prt*
Output of a stable weighing value after pressing
of
•
Manual totalizing (menu setting „ SALE no "), see
chap. 7.9.
Press
to the summation memory and issued.
Continuous data output
P Cont
see chap. 9.3
For automatic add-up see chap. 7.10.
P AUto
This function is used to issue and add individual
weighing values automatically to the summation
memory on unloading of weighing scale.
(menu setting „ SALE no ")
Not documented
wirel
P ASK Remote control instructions
Command
S
W
T
Z
P
Acknowledge selection by
b600
Baud rate

600, 1200, 2400, 4800, 9600 selectable.
b 9600*
Acknowledge selection by
and the weighing value will be added
Function
Stable weighing value for the weight is sent
via the interface
Weighing value for the weight (stable or
unstable) is sent via the interface
No data are sent, the balance carries out
the tare function.
No data are sent, the zero-display appears.
Quantity will be sent via the interface
.
.
EWJ-BA-e-1917