Teletext; Subtitles; Timeshift; Epg (Electronic Programme Guide) - THOMSON THT504 User Manual

Digital terrestrial hd receiver

Table of Contents

Use pq to select the desired stream and confirm with OK. The audio channel as stereo, mono,

left and right can be selected with the tu buttons.

6.4 Teletext

Your receiver includes a fully featured Teletext. To access Teletext, press the TTX button in

viewing mode and use the 0~9 buttons to input the number of the page you wish to see.

The coloured buttons of the remote control allow you to jump to selected pages directly, as

indicated on the bottom of the Teletext screen. Use the pq buttons to select one page up or

down, use tu buttons to select subpages. Press EXIT or TTX to get back to viewing mode.

Some channels support a choice of subtitle languages. Press SUBTITLE in viewing mode to

display a list of available subtitle languages. Select your subtitle of choice with pq and press

OK to confirm. Press EXIT to leave without making changes.*

* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then most likely

subtitles can be activated via Teletext if available.

Timeshift allows you to pause live broadcasts and resume playback later. To activate this

function set the Timeshift mode in the DVR Setting menu to on by selecting Pause. For details,

see 7.6.3. Press 2 in viewing mode to activate Timeshift. The progress information banner

appears on screen. Live TV keeps playing for moment and will then pause. Press u to resume

Timeshifted playback. Press 3 to return to live TV.

NOTE:

The Electronic Programme Guide is a very useful function that allows you to view event

schedules and programme information and to mark events/movies for recording. To access the

EPG, press the EPG button in viewing mode. Use pq to select a channel and tu to select

an event. Press OK to display detailed information of the selected event. Use EXIT to quit the

detailed information screen. Press RED to access further step functions. Use tu to select the

desired step and OK to execute it. Press EXIT to quit the step function. Press GREEN to set a

timer for a selected event. Refer to section 7.3.4 for details of the timer function.

NOTE:

Timeshift and its playback only work properly when a fast USB

storage device such as a USB2.0 HDD is connected to the receiver.

Timeshift and playback of HD content requires sufficient read/

write speed of the used USB storage device.

Availability of EPG data depends on broadcast.

Table of Contents