Operation; Changing Channels; Info Banner; Selection Of Audio Language - THOMSON THT709 User Manual

Choose the desired channel with the pq buttons. Alternatively, you can digit the channel number
with the 0~9 buttons on the remote control. Or press OK in viewing mode to display the channel list.
The volume can be adjusted with the t u buttons.
Default Password is 1234.

6.0 OPERATION

Your new receiver is equipped with several features to make watching TV a true pleasure. This
paragraph describes these features. Please also read chapter 7.0 to get familiar with the menu of your
receiver.

6.1 Changing channels

Your new receiver is equipped with four ways to change channels.
Via direct access using the 0~9 buttons.
Via the channel list trough OK button.
Via the PG+ and PG- keys.
Via the pq keys.
6.1.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the 0~9 keys on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel or press OK
immediately after selecting the channel number.
6.1.2 Channel list
Press OK in viewing mode to display the Channel List. Use pq in the Channel List to highlight your
channel of choice and press OK once to select the highlighted channel.
TIP:
6.1.3 Using the pq or PG+/PG- keys
p switches to the next channel.
q switches to the previous channel.
PG+ switches to the next 10 channels.
PG- switches to the previous 10 channels.

6.2 Info Banner

While watching TV you can press the INFO button any time to get information about the current
channel and event*. Press INFO twice for programme information and some technical details about
the current channel.
* Event information is displayed when available. Availability depends on broadcast.

6.3 Selection of audio language

Some channels support a choice of audio formats and/or languages. To select another audio stream,
press AUDIO in viewing mode. A list with available audio streams will now be displayed. Use pq to
select the desired stream and confirm with OK.

6.4 Teletext

Your receiver includes a fully featured Teletext. To access Teletext, press the TEXT button in viewing
mode and use the 0~9 buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages immediately, as indicated on the
bottom of the teletext screen. Use the pq buttons to select one page up or down, use t u buttons
to select subpages, if indicated at the bottom of the screen. Press EXIT or TEXT to get back to viewing
mode.
8
Use t u to toggle between the TV List and Radio List, press FAV for a list
of available favourite lists, toggle between them, also with t u.