Advertisement
Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera
Contents
Software compatibility
Software for devices registered to an on-premises service
The camera software for the Quad Camera, Precision 60 and SpeakerTrack 60 cameras is automatically upgraded through the codec.
For the PTZ-12 and PTZ 4K cameras no software upgrade applies.
Minimum RoomOS and CE software version requirement for the codecs can be found in the table below:
Quad Camera
Precision 60
SpeakerTrack 60
PTZ-12
1
PTZ 4K
Software for devices registered to Webex
The camera software for the Quad Camera, Precision 60 and SpeakerTrack 60 cameras is automatically upgraded through the codec when a new version is available from the cloud service.
For the PTZ-12 and PTZ 4K cameras no software upgrade applies.
Only one PTZ-12 camera is supported on CE9.6. Multiple PTZ-12 cameras are supported from CE9.7.
1
D15296.12 Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera JULY 2021.
Introduction
Physical interface
Codec C90
Codec C40/C60
N/A
N/A
N/A
N/A
TC 7.1
TC 7.1
N/A
N/A
N/A
N/A
Connecting to a codec
Connecting to a codec
Codec SX80
Codec Plus
CE 9.2
CE 9.1
TC 7.1, CE 8.1
CE 9.1
TC 7.1, CE 8.1
CE 9.10
CE 9.6
CE 9.6
N/A
RoomOS 10.3, CE.9.15.3
13
Factory reset
Appendix
Codec Pro
CE 9.4
CE 9.4
CE 9.4
CE 9.6
RoomOS 10.3, CE.9.15.3
Copyright © 2021 Cisco Systems, Inc. All rights reserved.
Camera guide
Advertisement
