Cisco PTZ 4K Camera Camera Manual page 35

Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera
Contents
Precision 60 Camera
A factory reset should only be performed by a system
administrator or in contact with Cisco technical support.
The camera will be reset to factory defaults, and all configu-
ration and logs will be erased.
It is not possible to undo a factory reset.
To perform a factory reset:
1. Locate the pinhole button at the back of the camera.
2. Use a pen or similar to press and hold the factory reset
button for 10 seconds.
3. The camera LED will be lit red during the factory reset.
Do not unplug power.
4. When the factory reset is complete, the camera restarts
and the camera LED lights up.
D15296.12 Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera JULY 2021.
Introduction Physical interface Connecting to a codec
Pinhole for
factory reset
35
Factory reset Factory reset Appendix
Copyright © 2021 Cisco Systems, Inc. All rights reserved.
Camera guide