Brother GTX pro Setup Manual page 27

6
Mounting the platen
1.
Press on the operation panel to move the platen to the
front.
2.
①
Rotate the platen height adjustment lever in direction a, and
align the scale to position "A".
3.
②
(a)
X0029
Insert the platen in direction s and tighten the platen fixing
lever in direction d.
Use with the knob (a) tightened when printing.
Depending on the height of the platen, the
platen fixing lever may strike against the platen,
TIPS
and prevent rotation. In that case, move the
platen fixing lever in the direction (b), draw the
edge of the platen fixing lever forward as shown
in (c), then loosen it again.
X0288
③
(c)
(b)
X0428
16