Table of Contents
Advertisement
Important Safety Information
The information in this manual is intended for use by a qualified technician who is familiar with the safety proce-
dures required for installation and repair, and who is equipped with the proper tools and test instruments required
to service this product.
Installation or repairs made by unqualified persons can result in subjecting the unqualified person making such
repairs as well as the persons being served by the equipment to hazards resulting in injury or electrical shock
which can be serious or even fatal.
Safety warnings have been placed throughout this manual to alert you to potential hazards that may be encoun-
tered. If you install or perform service on equipment, it is your responsibility to read and obey these warnings to
guard against any bodily injury or property damage which may result to you or others.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
3
INTRODUCTION
Your safety and the safety of others is very
This is a safety Alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol with the word "WARNING"
or "CAUTION". These words mean:
WARNING
Indicates a hazard which, if not avoided, can result in severe personal injury or death
and damage to product or other property.
CAUTION
Indicates a hazard which, if not avoided, can result in personal injury and damage to
product or other property.
All safety messages will tell you what the potential hazard is, tell you how to reduce
the chance of injury, and tell you what will happen if the instructions are not fol-
NOTICE
lowed.
Indicates property damage can occur if instructions are not followed.
important.
WARNING
Refrigeration system
under high pressure
Do not puncture, heat, expose to flame or incinerate.
Only certified refrigeration technicians should service
this equipment.
R410A systems operate at higher pressures than R22
equipment. Appropriate safe service and handling
practices must be used.
Only use gauge sets designed for use with R410A.
Do not use standard R22 gauge sets.
Advertisement
Table of Contents
