Additional Information For Hdmi - LG S65S3-S Owner's Manual

22 Connecting
ARC (Audio Return Channel) function
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of the unit.
To use this function :
- Your TV must support the HDMI-CEC and ARC
function and the HDMI-CEC and ARC must be set
to On.
- The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about ARC
2
function, refer to your TV manual.
- You must use the HDMI cable (Type A, High Speed
HDMI™ cable with Ethernet).
- You must connect the HDMI OUT on the unit with
HDMI IN of the TV that supports ARC function
using an HDMI cable.
- You can connect only one Sound bar to TV
compatible with ARC.
What is SIMPLINK?
Some functions of this unit are controlled by the
TV' s remote control when this unit and LG TV' s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV' s remote control :
Power on/off, volume up/down, mute, etc.
Refer to the TV owner' s manual for the details of
SIMPLINK function.
LG TV' s with SIMPLINK function has the logo as
shown above.
,
Note
y Depending on the state of the unit, some
SIMPLINK operation may differ from your
purpose or not work.
y Depending on a TV or a player which is
connected with this unit, SIMPLINK operation
may differ from your purpose.

Additional information for HDMI

y When you connect an HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device and
leave it for around 30 seconds, then switch on
this player.
- The connected device' s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 576p (or 480p), 1280 x 720p, 1920 x
1080i or 1920 x 1080p video input.
y Not all HDCP-compatible HDMI or DVI devices will
work with this player.
- The picture will not be displayed properly with
non-HDCP device.
,
Note
y If a connected HDMI device does not accept
the audio output of the player, the HDMI
device' s audio sound may be distorted or may
not output.
y Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the player and then turn it on again.
y When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
y If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m.)
y You cannot change the video resolution in the
HDMI IN mode. Change the video resolution
of the connected component.
y If the video output signal is abnormal when
your personal computer is connected to HDMI
IN jack, change the resolution of your personal
computer to 576p (or 480p), 720p, 1080i or
1080p.