Anti-Vibration System - Jonsered CS 2166 Workshop Manual

Anti-vibration system

!
WARNING!
The fuel that is used in the chainsaw
poses the following hazards:
1. The fluid and its fumes are poisonous.
2. Can cause skin irritation.
3. Is highly inflammable.
Dismantling
1. Remove the following components:
• Chain and guide bar.
• Cylinder cover.
• Tank unit.
2. Detach the springs from the cylinder with the help of
a 4 mm Allen key. See fig. 1.
3. Detach the springs from the tank unit with service
tools 502 52 18-01 and 502 52 18-02. See fig. 2.
Cleaning and inspection
Clean and inspect all parts.
Reassembly
1. Use pliers to attach the springs to the tank unit.
2. Attach the springs to the cylinder with the help of a 4
mm Allen key. See fig. 1. Tighten the bolts to 10 Nm.
3. Refit the following components:
• Tank unit.
• Cylinder cover.
• Chain and guide bar.
38 – English
ANTI-VIBRATION SYSTEM
Fig. 1
Fig. 2
B