Makita GRU05 Instruction Manual page 3

5. Never operate the tool when tired, feeling ill or
under the influence of alcohol or drugs.
6. Avoid accidentally starting:
Ensure the switch is in the off posi-
—
tion before installing the battery pack.
Inserting the battery pack into the tool with
the switch on invites accidents.
— Carrying the tool with your finger on the
switch invites accidents.
The tool should be switched off immediately if
7.
it shows any signs of abnormal operation.
8. Don't force the tool. It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
9. Don't overreach. Keep proper footing and
balance at all times.
10. Stay Alert - Watch what you are doing. Use
common sense. Do not operate appliance
when you are tired.
11. Store idle appliances indoors.
12. Keep fingers away from switch trigger when
not operating the tool and when moving from
one operating position to another.
Intended use of the tool
1. Use right tool. This tool is only intended for
cutting grass and light weeds. It should not be
used for any other purpose such as edging or
hedge cutting as this may cause injury.
2. Use only the manufacturer's recommended
accessories and attachments. Use of any other
accessories and attachments may increase the
risk of injury.
Personal protective equipment
1. Dress Properly. The clothing worn should be
functional and appropriate, i.e. it should be
tight-fitting but not cause hindrance. Do not
wear loose clothing or jewelry. They can be
caught in moving parts. Use of thick leather
gloves and substantial footwear is recom-
mended when working outdoors. Wear protec-
tive hair covering to contain long hair.
2. In order to avoid either head, eye, hand or foot
injuries as well as to protect your hearing the
following protective equipment and protective
clothing must be used during operation of the
equipment.
3. Always wear a helmet where there is a risk of
falling objects. The protective helmet is to be
checked at regular intervals for damage and
is to be replaced at least every five years. Use
only approved protective helmets.
Use safety glasses. The visor of the helmet (or
4.
alternatively goggles) protects the face from
flying debris and stones. During operation
of the tool always wear goggles, or a visor to
prevent eye injuries.
5. Wear adequate noise protection equipment
to avoid hearing impairment (ear muffs , ear
plugs etc.).
6. Work overalls protect against injury from
flying stones and debris. It is strongly recom-
mended that the user wears work overalls.
7. Special gloves made of thick leather are part of
the prescribed equipment and must always be
worn during operation of the tool.
When using the tool, always wear sturdy shoes
8.
with a nonslip sole. This protects against injuries
from flying debris and ensures a good footing.
Use a dust mask if operation is dusty.
9.
Electrical and battery safety
1. Avoid dangerous environment. Don't use the
tool in damp or wet locations or expose it to
rain. Water entering the tool will increase the risk
of electric shock.
Prevent unintentional starting. Ensure the
2.
switch is in the off-position before connecting
to battery pack, picking up or carrying the
machine. Carrying the machine with your finger
on the switch or energizing machine that have the
switch on invites accidents.
3. Disconnect the battery pack from the machine
before making any adjustments, changing
accessories, or storing machine. Such preven-
tive safety measures reduce the risk of starting the
machine accidentally.
4. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
5. Use machines only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
3 ENGLISH