Clean The Mould; Wash The Mould - oticon BTE Nera2 Pro Ti Instructions For Use Manual

Clean the mould

The mould should be cleaned
regularly. Use a soft cloth to
clean the surface of the mould.
Use the MultiTool wire loop
to clean the opening.
26 About Startup Handling Options Tinnitus Warnings More info
Replace the tube
The tubing between the mould
and the hearing aid should be
replaced when it becomes
yellow or stiff. Consult your
hearing care professional in
relation to this.

Wash the mould

Step 1 Step 2
Make sure you are Disconnect the tube
able to identify which and mould from the
mould is for which hook. Hold the hook
hearing aid before firmly, when pulling
disconnecting them off the tube. Other-
from the hearing aids. wise the hearing may
be damaged.
Step 3
Wash the mould
and tube using mild
soap. Rinse and dry
completely before
reconnecting to the
hearing aid.
27