Clean The Mould - oticon Alta2 Pro Instructions For Use Manual

Table of Contents

Advertisement

Clean the mould

The mould should be cleaned
regularly. Use a soft cloth to
clean the surface of the mould.
Use the MultiTool wire loop
to clean the opening.
24
About Start up
Handling
Options Warnings More info
Replace the tube
The tubing between the mould
and the hearing aid should be
replaced when it becomes
yellow or stiff. Consult your hear-
ing care professional in relation
to this.
Wash the mould
Step 1
Step 2
Make sure you are
Disconnect the tube
able to identify which
and mould from the
mould is for which
hook. Hold the hook
hearing aid before
firmly, when pulling
disconnecting them
off the tube. Other-
from the hearing aids.
wise the hearing aid
may be damaged.
Step 3
Wash the mould
and tube using mild
soap. Rinse and dry
completely before
reconnecting to the
hearing aid.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alta2Nera2 proNera2Ria2 proRia2Bte 13 pp

Table of Contents