Scan Photos And Graphics - Brother MFC-J2340DW Online User's Manual

Home > Scan > Scan Using the Scan Button on Your Machine

Scan Photos and Graphics

Send scanned photos or graphics directly to your computer.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother iPrint&Scan.
1. Load your document.
2. Press [Scan] > [to PC] > [to Image].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then select the computer name.
If the LCD message prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer,
and then press [OK].
4. To change the settings, press
To use [Options], you must connect a computer with Brother iPrint&Scan installed to the machine.
5. Press [Scan Settings] > [Set at Device].
6. Select the scan settings you want to change, and then press [OK].
Option
Colour Setting
Resolution
File Type
Document Size
Brightness
Contrast
Auto Deskew
Skip Blank Page
Remove Background Colour Change the amount of background colour that is removed.
To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to make
this a One Touch Shortcut. Follow the LCD instructions.
[Options].
Description
Select the colour format for your document.
Select the scan resolution for your document.
Select the file format for your document.
Select your document size.
Select the brightness level.
Select the contrast level.
Correct any skewed documents when they are scanned.
When On is selected, blank pages are skipped.
> Scan Photos and Graphics
104