Electrical connection
6.3 Preparation
①
②
③
④
Figure 6-6
You find further information in the "Operation with converter" section.
6.3.7
Connection without terminal box
If the machine was ordered without terminal box (where the cables are simply brought out of
the motor), then the proper connection must be made in an external terminal box.
Incorrect dimensioning
Faults can occur if the appropriate technical data is not complied with when connecting up.
For instance, degree of protection, minimum air and creepage distances. These faults can
result in eventual or immediate death, serious injury or material damage.
● Ensure that the external terminal box is dimensioned according to the data on the rating
If the motor has been ordered with brought-out leads, in this case you must comply with the
relevant conditions for Zone 2. It is assumed that the buyer, the installer and users of the
installation are familiar with these conditions and will carefully observe them.
74
Hexagon bolt
Spring washer
Terminal Board
Grounding conductor
High-frequency grounding
WARNING
plate and is suitable for the respective use.
⑤
Hexagon nut
⑥
Radio-frequency grounding cable
⑦
Cable lug
SIMOTICS TN Series N-compact 1PQ8
Operating Instructions 11/2018