Table of Contents
Advertisement
Handset
Display backlight
The display backlight always illuminates when the handset is taken out of the base station/
charging cradle or when a key is pressed. Any digit keys that are pressed appear on the display
for pre-dialling.
Switch the display backlight on/off when in idle status:
¤
. . . use
OK . . . then
Backlight when in the charging cradle:
Backlight when not in the charging cradle:
Save selection:
The handset's standby time may be significantly reduced if the display backlight is
switched on.
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as it is removed from the
charging cradle.
¤
. . . use
Change (
= on)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
2 seconds while placing the handset in the charging cradle.
Activating/deactivating visual call signal
Visual indication of incoming calls via the spot LED (e.g. in noisy environments).
¤
. . . use
Signal
Change (
Changes are only saved permanently in Profile Personal.
52
to select
Settings
¤
In Charger: . . . use
¤
Out of Charger
¤
Save
to select
Settings
to select
Settings
= on)
OK
Display
to select On or Off
. . . use
to select On or Off
OK
Telephony
OK
Telephony
OK
Backlight
OK
Auto Answer
for a further
OK
LED Call
Advertisement
Table of Contents
