Select data mode
●
With the inside (concave surface) facing you ensure that the mode selection switch points to 1 (LoRaWAN).
For configuration of BACnet, see Commissioning.
Preparing data connection
Set up your LoRaWAN gateway router prior to installation and on-boarding if LoRaWAN is used
●
Unpack the contents of your surface mount kit and In-wall mount kit. If you plan to use LoRaWAN for data
connectivity, locate the LoRa gateway antenna provided in the surface mount kit and screw it onto the top of
the surface mount.
A6V13562246_en--_c
Mounting and installation
Drywall mounting
1
5 | 16