Special Safety Instructions - Hyundai KH-G03-T Owner's Manual

3).Unplug the tool and/or disconnect the battery pack from the tool before any adjusting,
any accessories replacing, or storing the power tool. Such preventive safety measures will
reduce the risk of starting the power tool accidentally.
4).Store idle power tools out of the reach of children and do not allow those who are not
familiar with the power tool or who do not understand these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
5).Maintain the power tool. Check if the moving parts are in place or stuck,check the degree
of wear of the parts and any other conditions that affect the power tool's operation. If
damaged, the power tool should be repaired before use. Many accidents are caused by
poorly maintained power tool.
6).Keep the blade sharp and clean. Properly maintained blades with sharp cutting edge are
less likely to be stuck and easier to control.
7).Use the power tool, accessories and blades in accordance with these instructions, taking
into account the work conditions and the work to be performed. Use of power tool for
those operations that are inconsistent with intended application may cause danger.
5.Notices for using the battery tools
1).Ensure that the switch is in OFF position before inserting the battery pack. Otherwise it
may invite accidents.
2).Only use the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack my create a risk of fire when used with another battery pack .
3).Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire. 4).When battery pack
is not in use, keep it away from other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that cam make a connection from one terminal to
another. Shorting the battery terminals may cause burns or a fire.
5).Under abusive conditions, liquid may be ejected from the battery, please avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause corrosion or burns.
6.Service
Have your power tool serviced by a qualified repair person using only identical replac-
ement parts. This will ensure the safety of the power tool which is maintained.

Special safety instructions

1.Special safety instructions of the tying machine
1）Don't remove the front cover at the time of operation. The front end tying mouth
shall maintain at least 5CM distance away from any part of body. don't touch the
tying mouth when the equipment is operating. During the operation of the tying
machine, any negligence may cause personal injury.
2）After tying action is completed, hold the handle to move the tying machine, the
prudent usage of the tool will protect the operator effectively and extend the service
life of the tying machine.
2.Other safety instructions
1）Do not use the tying machine in the rain or the strong magnetic field environment.
2） The product is designed to tie grape vines and other branches within the effective
range of 25MM maximum diameter. Don't use it in all kinds of tying work exceeding
the range of 25MM maximum diameter. The excess of this range would damage the
tying machine.
E NGLISH
40
4