Daikin FHQ50CBVEB Operation Manual page 13

1. Open the suction grille.
Slide the knob to the arrow direction and slowly
open the grille.
Knobs
FHQ35·50
: 2 places
FXHQ32
FHQ60·71·100·125·140
FXHQ63·100
2. Take out the air filter.
Push up the knobs at 2 places and take out the
air filter.
Air filter
3. Clean the air filter.
Clean the contamination with a vacuum cleaner
or wash it with water.
If the air filter is
extremely con-
taminated, wash
it with neutral
detergent using
a soft brush.
English
Knob
: 3 places
Knob
Air filter
After dewater-
ing, dry the air
filter in the
shade.
NOTE
• Do not wash the air filter with water of 50°C or
higher. It may cause decolorization and defor-
mation.
• Do not heat the filter with fire. It may cause
burning.
4. Attach the air filter.
After the air filter is cleaned, return the air filter to
the original place as it was attached before.
5. Close the suction grille.
Slide all the knobs in the reverse order men-
tioned in the Clause 1 and securely fix the grille.
6. Turn off the indication "
filter" displayed on the remote controller after
turning on the power.
The indication can be turned off whether in oper-
ation or at stop.
<In case of BRC1E, BRC1D>
• For details, refer to the operation manual
attached to the remote controller.
<In case of BRC1C>
• Press FILTER SIGN RESET button.
HOW TO CLEAN THE SUCTION GRILLE
1. Open the suction grille.
Slide the knob to the arrow direction and slowly
open the suction grille.
Knobs
FHQ35·50
: 2 places
FXHQ32
FHQ60·71·100·125·140
FXHQ63·100
2. Remove the suction grille.
1 Keeping the suction grille open, remove the
strap.
" or "Time to clean
Knob
: 3 places
Strap
10