Download Print this page

Maintenance And Care - JEFF ROWLAND 925 Operational Manual

Monoblock amplifier

Advertisement

MAINTENANCE AND CARE

All Jeff Rowland Design Group products are designed to provide a lifetime of enjoyment and
listening pleasure.
The chassis is sealed to prevent dust from entering the interior of the chassis and thus should
never need interior cleaning during the lifetime of the product. All internal circuitry is
maintenance-free such that no adjustments of any kind are necessary over the lifetime of the
product. If the ampli er is ever in need of service, updating, or upgrading, it should only be
returned to an authorized repair facility or technician for servicing.
The front panel of the unit is precision-machined in a unique process that incorporates a
diamond tipped cutting tool. This process was re ned over many years to produce an
attractive and unique appearance. Because the surface is not nished in the typical fashion of
most audio and video equipment, there are a few rules that must be kept in mind when
cleaning the equipment.
NOTE: PLEASE ALLOW THE FRONT PANEL, WHICH IS COATED WITH AN AUTOMOTIVE-GRADE POLYURETHANE
FINISH, TO CURE FOR 6 MONTHS BEFORE ATTEMPTING TO CLEAN IT. THIS WILL PREVENT SMALL SCRATCHES
FROM MARRING THE SURFACE BEFORE THE SURFACE COATING HAS HAD A CHANCE TO HARDEN
COMPLETELY.
WARNING: THE FRONT PANEL OF THE UNIT SHOULD NEVER BE CLEANED WITH ANYTHING OTHER THAN A
VERY SOFT COTTON CLOTH AND PLAIN WATER OR FINE OIL-BASED FURNITURE POLISH. BECAUSE OF THE
FINE FINISH OF THE FRONT PANEL, USE OF ANY OTHER CLEANING AGENT MAY PERMANENTLY SCRATCH THE
FINISH.
The top and bottom cover, sides and bottom are protected by a durable black anodized nish
and can be cleaned with a soft cotton cloth (such as an optical lens or micro ber cleaning
cloth) dampened with plain water. Water should be applied directly to the cloth and not the
chassis. A very mild plastic or glass cleaner that does not contain ammonia may also be used. If
a mark has been left on the chassis, do not use any type of abrasive or chemical cleaner to
remove the mark.
If you have any questions about the care or cleaning of your
,
MODEL 925 MONOBLOCK AMPLIFIER
please contact your dealer before attempting to clean the chassis. The use of a cleanser or
abrasive to clean the chassis that has not been approved by the factory will almost certainly
damage the nish and will not be covered under warranty.
MODEL 925 MONO AMPLIFIER MANUAL
REVA3
PAGE 8

Advertisement

loading