Advertisement
the negative (–) binding post. Secure the loudspeaker connections by tightening the knob securely
with your ngers.
AUX PS INPUT: Connect with
7.
DC POWER INPUT: Connect with
8.
DC POWER OUTPUT: Connect with
9.
10. AUX PS OUTPUT: Connect with
11. AC MAINS INPUT: Install the
the ampli er and your AC mains outlet.
12. REMOTE ON/OFF: A 1/8" (3.5 mm) mini-plug connector is provided on the rear panel of the
925 MONOBLOCK AMPLIFIER
STANDBY
modes. When connected to another component with the proper circuitry, the ampli er
standby function can be turned
13. INTEGRATED HANDLES: Use to move and position ampli er and power supply.
14. DC POWER CABLE: Connect to
15. DC POWER CABLE: Connect to
16. AUX PS INPUT CABLE: Connect to
17. DELRON ISOLATION SPHERES: Set each sphere in one of four circular indentions in top cover
of power supply. Align isolation spheres with circular indentions in bottom cover of ampli er.
AMPLIFIER SETUP
The
POWER SUPPLY CHASSIS
Locate and place
DELRIN ISOLATOR SUPPORT SPHERES (18)
respective dimples machined into the top of the
the
AMPLIFIER CHASSIS
slightly until the chassis firmly "locks" into place by resting upon the Delrin spheres. This
unique chassis placement ensures both perfect alignment and effective isolation
between chassis.
NOTE: DIRECT CONTACT BETWEEN THE TWO CHASSIS MAY RESULT IN DAMAGE TO THE
ANODIZED COATING. PLACING THE AMPLIFIER ON TOP OF THE POWER SUPPLY MAY REQUIRE
TWO PEOPLE TO ABSOLUTELY AVOID DAMAGE TO EITHER CHASSIS.
1. Insert
DC POWER CABLE (14)
connector shell and rotate until alignment is achieved. Then firmly push cable shell
until it locks in place. A "click" will be felt and heard when the cable is correctly
AUX INPUT CABLE (17)
DC POWER CABLE (15)
DC POWER CABLE (16)
AUX PS INPUT CABLE (11)
AC POWER CABLE
for remotely switching the ampli er between
and
remotely.
ON
OFF
DC POWER INPUT (8)
DC POWER OUTPUT (9)
AUX PS INPUTS (7)
is always placed first on a stable platform, rack, or shelf.
directly above the
POWER SUPPLY CHASSIS
into the
DC POWER INPUT (8)
MODEL 925 MONO AMPLIFIER MANUAL
.
.
.
.
AC MAINS INPUT
into the
OPERATIONAL
.
.
(10)
and
.
into each of the four
POWER SUPPLY CHASSIS
and move sideways
receptacle. Insert cable
connector between
MODEL
and
. Carefully place
REVA3
PAGE 12
Advertisement
