Operation; Main Power Switch; Setting A Cooking Zone - Bosch NIT5469UC/01 Use And Care Manual

Operation

Main power switch

Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the On/Off touch key until the indicator above the
main switch and the temperature level indicators
to the heating elements turn on.
Turning the cooktop off
Touch the On/Off touch key. The indicator above the On/
Off key goes out. The cooktop is switched off. The
residual heat indicators will remain on until the elements
have cooled off sufficiently.
Notes
The cooktop switches off automatically when all the
▯
elements have been switched off for more than
20 seconds.
The residual heat indicator remains lit until the
elements have cooled down sufficiently.
displayed next to the corresponding element symbol.
The settings will be stored for 4 seconds after turning
▯
off the cooktop. If you turn the cooktop back on during
that time the cooktop will continue with those settings.

Setting a Cooking Zone

Set the desired power level using the
Power level = lowest power level
ò
Power level = highest power level
ê
Every power level has an intermediate setting. This is
marked in the control panel with the
Notes
To protect the fragile parts of your appliance from
▯
overheating and electrical overloading, the cooktop
may temporarily reduce the power automatically.
In order to prevent the appliance from producing
▯
excess noise, the cooktop may temporarily reduce the
power automatically.
‹ next
/ is
• œ
to symbols.
ò ê
Ø symbol.
Selecting a cooking zone and power level
The cooktop must be turned on.
The power level is set.
Touch the symbol for the required cooking zone.
$
1.
The ‹ display gets brighter.
Select the desired power level from the settings range.
2.
The power level is set.
Changing the power level
Select the cooking zone and then set the desired power
level in the control panel.
Turning off the element
Select the element and set the heat level to 0. The
element is turned off and the residual heat indicator is
displayed.
Notes
If there is no cookware on the induction cooking zone,
▯
the heat setting display blinks. After a while, the
cooking zone will switch itself off.
If cookware has been placed on the cooking zone
▯
before you turn on the cooktop, it will be detected
within 20 seconds after you have touched the main
switch and the cooking zone will be selected
automatically. Once detected, set the power level
within the next 20 seconds, otherwise the cooking
zone will turn off.
Even if there are several pots and pans on the cooktop
when it is switched on, only one piece of cookware is
detected.
11