Backyard Pro PH08-SB Quick Start Manual page 8

ASSEMBLY INSTRUCTIONS
5. Unscrew（M3/16) 4pcs screws from the
bottom of the middle plate(F). Install an
AA battery(EE) into the control box.
Assemble the control box(K) onto the bottom
of middle plate using the (M3/16) screws.
Note : The control knob is to face to the front
of the heater where the magnet is installed in
the middle plate.
6. Unscrew screws(M3/16) from the top of
damper(B) Assemble the reflector (A) onto
the damper (B) using the (M3/16) screws.
5
6
A
B
8
K