Combining Units And Options; Possible Options For The Outdoor Unit; Possible Options For The Indoor Unit - Daikin ERRA08-12EW1 Installer's Reference Manual

5.2 Combining units and options

5.2.1 Possible options for the outdoor unit

5.2.2 Possible options for the indoor unit

ERRA08~12E + ELVH/X12S18+23E
Daikin Altherma 3 R MT F
4P708474-1 – 2023.05
Model identification
Example: E LV X 12 S 23 EJ 6V
Code
E European model
LV Floor-standing indoor unit (refrigerant split) with integrated
tank
X H=Heating only
X=Heating/cooling
12 Capacity class
S Integrated tank material: Stainless steel
23 Integrated tank volume
EJ Model series
6V Backup heater model
INFORMATION
Certain options may NOT be available in your country.
Mounting stand (EKMST1, EKMST2)
In colder regions where heavy snowfall can occur, it is recommended to install the
outdoor unit on a mounting frame. Use one of the following models:
▪ EKMST1 with flange feet: to install the outdoor unit on a concrete foundation
where drilling is allowed.
▪ EKMST2 with rubber feet: to install the outdoor unit on foundations where
drilling is not allowed or possible, such as flat roofs or pavements.
For installation instructions, see the installation manual of the mounting stand.
Multi-zoning wired controls
You can connect the following multi-zoning wired controls:
▪ Multi-zoning base unit 230 V (EKWUFHTA1V3)
▪ Digital thermostat 230 V (EKWCTRDI1V3)
▪ Analogue thermostat 230 V (EKWCTRAN1V3)
▪ Actuator 230 V (EKWCVATR1V3)
For installation instructions, see the installation manual of the control, and the
addendum book for optional equipment.
Room thermostat (EKRTWA, EKRTRB)
You can connect an optional room thermostat to the indoor unit. This thermostat
can either be wired (EKRTWA) or wireless (EKRTRB).
5 About the units and options
|
Description
Installer reference guide
29