Oricom TPS10 Operating Instructions Manual page 19

NOTE:
• Tow vehicle sensors can only be programmed to the tow vehicle interface.
DO NOT program Trailer or Spare sensors to tow vehicle interface and
vice versa.
• Spare tyre data is updated every 15 minutes or if there is a significant
change in air pressure.
• Display dims and brightens depending on the light conditions sensed by
the solar panel.
• DO NOT program sensors to Axle B.
• The tyre data can be cleared by performing a reset, press and hold down
both buttons for 3 seconds, the screen should clear the tyre pressure
readings and "--" will appear on the screen. Once driving the tyre
pressures will display automatically.
NOTE: Please visit our website to view tutorial videos on how to
program sensors to the control unit, Visit www.oricom.com.au
select your model and scroll down to the FAQ's section.
Sensor programming
19