Sensor Re-Programing - Oricom TPS10 Operating Instructions Manual

Sensor programming
Note: Sensors in 4 and 6 packs come programmed, Additional twin sensor
packs purchased will need to be programmed
When programming a new sensor or a missing sensor to the display.
Enter Programming Mode:
Press " " button 5 times, the display will beep once to confirm you are
now in sensor programming mode.
Sensor Programming
Press the "
- once the desired sensor position is flashing you are ready for programming
that sensor.
Interface
" button to cycle through the sensors.
Psi
Trailer interface
Sensor programming
Psi
Spare interface
Psi
Psi
17