Oricom TPS10 Operating Instructions Manual page 12

Settings
High Pressure Value Setting:
• Press the "
interface.
• Press " " to save and enter the next setting.
Note: When more than 4 sensors are connected you can set the high
pressure value for the individual interfaces (Tow vehicle / Trailer / Spare) to
do this, whilst in the high pressure value setting:
1. Press the "
interface.
2. Press and hold the "
display will change from the tow vehicle to the trailer.
3. Press the "
4. Press " " to save and enter the next setting.
Note: To change the high pressure setting for the Spare Tyre Interface,
repeat steps 2 and 3.
Press " " button once to enter the next setting.
Interface
12
" button to set the high pressure value of the current
" button to set the high pressure value of the current
" button and press the " ". The image on the
" button to set the high pressure value for the trailer.
Psi
Trailer interface
Psi
Spare interface
Psi
Psi