Oricom TPS10 Operating Instructions Manual page 14

Settings
High Temperature Value Setting:
• Press the "
interface.
• Press " " to save and enter the next setting.
Note: When more than 4 sensors are connected you can set the high
temperature value for the individual interfaces (Tow vehicle / Trailer / Spare)
to do this, whilst in the high temperature value setting:
1. Press the "
interface.
2. Press and hold the "
display will change from the tow vehicle to the trailer.
3. Press the "
4. Press " " to save and enter the next setting.
Note: To change the high temperature setting for the spare tyre interface,
repeat steps 2 and 3.
Press " " button once to enter the next setting.
Note: Please visit our website to view tutorial videos on how to set
value settings, Visit www.oricom.com.au and select model and
scroll down to the FAQ's section.
14
" button to set the high temperature value of the current
" button to set the high temperature value of the current
" button and press the " ". The image on the
" to set the high temperature value for the trailer.