Page 1
Chat: www.edsal.com Email: support@edsal.com Phone: 1-773-475-3131 To obtain replacement parts please provide: Model Number, Description and Date of Purchased. EDSAL MANUFACTURING CO, LLC | 1555 W. 44TH STREET | CHICAGO, IL 60609 | www.edsal.com THANK YOU FOR YOUR PURCHASE rev: C041723_V2...
WARRANTY Edsal Manufacturing Company, LLC products are guaranteed for a period of one (1) year from the date of purchase. The SOLE AND EXCLUSIVE REMEDY for such defects is the repair or replacement of a defective product or parts thereof by Edsal Manufac- turing Company, LLC or, at Edsal Manufacturing Company, LLC option, refund of the purchase price upon return of the item to Edsal Manufacturing Company, LLC.
PACKAGE CONTENTS C (x6) Beam A (x1) B (x1) D (x1) E (x1) Left Side Right Side Left Back Right Back Panel Panel Panel Panel F (x1) G (x2) Top Panel Fixed Shelf H (x2) Adjustable Shelf K (x4) L (x8) M (x2) Leg Leveler Shelf...
ASSEMBLY STEP 1: INSTALL LEG LEVELERS Insert Leg Levelers (K) into the bottom holes of Left Side Panel (A) and Right Side Panel (B). STEP 2 : INSTALL BEAMS Start by installing two Beams (C) to the middle section of Side Panels (A) and (B), both front and back. Do this by inserting the two end tabs on each side of the beam into the two slots of each side panel.
ASSEMBLY (Continued) STEP 3: INSTALL BACK PANELS Attach the Left Back Panel (D) and Right Back Panel (E) onto the backside of each beam level. Do this by attaching each of the tab hooks, located at the top, middle and bottom of each inner back panel, onto each beam level (see Fig 3). Be sure all the tab hooks are fully attached onto each beam (see Fig.
Page 6
ASSEMBLY (Continued) STEP 5: INSTALL PUSH BUTTON PINS TO BACK PANELS First be sure all holes from the back panel align with the holes from the side panels (see Fig. 6 for hole locations). Install 12 Push Button Pins (N) into the 12 hole locations shown (see Fig. 6). Use a rubber mallet to gently tap in the push button pins until fully engaged (see Fig.
Page 7
ASSEMBLY (Continued) STEP 7: INSTALL TOP DOOR HINGES Insert the Top Door Hinges (M) into the hole located on the top end of Left Door (I) and Right Door (J). STEP 8: INSTALL DOORS Install the Left Door (I) and Right Door (J) starting at the bottom. Locate the hole at the bottom of the door and place onto the hinge located on the bottom of the side panel (see Fig.
Page 8
ASSEMBLY (Continued) STEP 9: INSTALL PUSH BUTTON PINS TO TOP PANEL First be sure all holes from the top panel, back panel and side panels are aligned with one another (see Fig. 13 for hole locations). Install eight Push Button Pins (N) into the 8 hole locations shown (see Fig. 13). Use a rubber mallet to gently tap in the push button pins until fully engaged (see Fig.
PARTS LIST Part Description Part Number Part Description Part Number Left Side Panel ASS7218-L Right Door ADR7218-R Right Side Panel ASS7218-R Leg Leveler RTALLGVL Beam N2R-BM36-BLK Shelf Clip SCLIP-STD Left Back Panel ABKL7217 Top Door Hinge HNG-TOP Right Back Panel ABKR7218 Push Button Pins RTA-PUSHBUTTON...
MAINTENANCE AND CARE • • Periodically check to make sure the beams tabs are secure into the slots of the side panels. Periodically check to make sure the beams tabs are secure into the slots of the side panels. • Use a dry or slightly dampened, clean cloth to wipe down the cabinet if needed. Take a survey about this product by scanning the QR code below:...
Need help?
Do you have a question about the RTA361872-BLK and is the answer not in the manual?
Questions and answers