Setting Up A Cd Program; Playing A Program List; Displaying The Program List; Edit Program List - RCA RS2652 User Manual

RS2652 EN 5/17/05
CD Player

Setting Up a CD Program

Tips:
You can create a program of up to 32 tracks.
1. While the CD player is stopped, press
PROG•SET to enter program mode. The
system displays the next available program
number (-- -- P:01).
2. Press DISC SKIP to select disc. Refer to the
DISC STATUS DISPLAY to see the disc that is
selected.
3. Press SKIP BACKWARD
FORWARD
into memory.
4. Press PROG•SET to save your settings.
5. Repeat steps 2 to 4 to store more tracks into
program memory.
Note:
Only the first 99 tracks from each disc can
be programmed.
9:49 AM Page 17
/ SKIP
to select the track to enter

Playing a Program List

While in PROGRAM mode , press PLAY/PAUSE
If you are not currently in program mode, press
PROG•SET to enter program mode before
pressing PLAY/PAUSE .
Display Program List
1. While the CD player is stopped, press
PROG•SET to enter PROGRAM mode.
2. Press PROG•SET repeatedly to view each track
assignment in the program list.

Edit Program List

1. Follow "Display Program List" steps until the
location to be edited is displayed.
2. Repeat steps 2 to 4 under "Setting Up a CD
Program " to edit the track to store into
memory.

Deleting Program List

While in PROGRAM mode, press and hold STOP
for 3 seconds. They system displays the message
CLEAR.
EN
.
11