Subscribe to Our Youtube Channel
Related Manuals for Displays2go DSTAND2BK
Summary of Contents for Displays2go DSTAND2BK
- Page 1 DUAL TV STAND WITH TWO ROTATING BRACKETS FITS 32” – 70” User Manual SKU: DSTAND2BK, CDSTAND2BK Scan the QR code to visit the product page.
-
Page 2: Safety And Warning
CAUTION: Severe personal injury and property damage can result from improper installation or assembly. Read the following warning carefully before assembly. If you have any questions regarding any of the instructions or warnings, please contact Displays2go. • Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage to the items, which greatly reduces their holding power. -
Page 3: Base Assembly
*Hex Wrench for Part F can be found inside the TV Bracket box. (DUOPOLEBK, DUOPOLESL) CAUTION: Heavy metal base can cause muscle strain or back injury! Two people required for assembling and moving unit. If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388. -
Page 4: Identify Parts
Identify Parts 1. Identify all parts and lay out 4 tubings (C1, C2, D1, D2) on a flat surface. See picture below to identify position of each tubing (upper or lower, left or right). • Confirm each tubing has at least one pair of 2 holes facing outward (see detail 2). •... - Page 5 Place Lower Tubings 2. Carefully place the metal base (B) on hard, flat ground. 3. Insert left and right lower tubings (C) into the left and right upright slot on the metal base. Holes at top of lower tubings should face outward to align with the holes of tubing connectors later in assembly.
- Page 6 Place Upper Tubings 5. Insert tubing connectors (E) into the lower tubings, aligning screw holes. 6. Secure tubing connectors to lower tubings using screws (F). Tighten with hex wrench. Upper Tubings with Connectors 7. Insert left and right upper tubings (D) into tubing connectors, aligning screw holes.
- Page 7 TVs in portrait mode if the weight is under 15 pounds (6.8 kg). CAUTION • DSTAND2BK can hold dual flat TVs up to 70”, depending on different layouts and orientation. TVs cannot be rotated while 2 TVs are mounted at the same time.
- Page 8 Measure TVs Distance between TVs Lay the TVs in their intended position and measure the distance between the first VESA mount holes of each unit. This measurement is the minimum distance between each connector to ensure TVs will not interfere with each other.
- Page 9 TV to best fit the location of both TVs on the stand. Do NOT adjust the bracket position while the TV is mounted to the pole. If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388.
Need help?
Do you have a question about the DSTAND2BK and is the answer not in the manual?
Questions and answers