Table of Contents
Advertisement
6.4. Replacing the U.2 NVMe Drive
1.
Make sure that you requested and obtained the replacement drive from NVIDIA Enterprise Sup-
port.
2.
Back up any critical data to a network shared volume or some other means of backup.
3.
Power off the system using the power button.
4.
Remove the bezel. Refer to
5.
After the system powers off, use the following figure to identify the drive to replace on the chas-
sis.
The figures in the following procedures show replacing drive number 7 at PCI address ae.
6.
Remove the NVMe drive.
1.
Press the tab on the right side of the drive to release the lever:
2.
Pull the drive out by using the lever:
6.4. Replacing the U.2 NVMe Drive
Removing and Attaching the Bezel
NVIDIA DGX H100 Service Manual
for more information.
39
Advertisement
Table of Contents
