Table of Contents
Advertisement
▶
After the triangular markers align, lift the tray lid to remove it.
4.
Optional: Depending on the procedure that you need to perform, remove the air baffles from the
motherboard.
5.5. Close the Motherboard Tray Lid
Before you perform the following steps, ensure that all components are installed correctly so that they
do not interfere with the air baffles or tray lid.
1.
Insert the motherboard tray baffles and then place the tray lid over the motherboard tray.
2.
To close the tray lid, perform the following motions:
▶
Position the tray lid correctly by aligning the markers as shown in the following figure.
▶
Push the tray lid toward the IO section of the tray until the folding section is flush.
▶
Press the folding section down so that the thumbscrews align with the screw holes.
5.5. Close the Motherboard Tray Lid
NVIDIA DGX H100 Service Manual
31
Advertisement
Table of Contents
