Troubleshooting; Specifications; Parts Included - Dri-Eaz BD2500 Owner's Manual

TROUBLESHOOTING

F A U L T
Water drips out
when moving unit
Unit does not op-
erate
Unit operating,
but room not dry
Unit collects too
little water
If the problem you are experiencing is not listed here, call your local distributor.

SPECIFICATIONS

Name
Dimensions (W × H × D)
Weight (w/ cord & hose)
Refrigerant
Amps
Power
Compressor rating
Air movement
Water removal
Operating temperature range
Sound level
Safety
Specifications are subject to change without notice. Some values
may be approximate.
07-01900G F413-230V AU BD2500
C A U S E
Unit was unplugged before
purging was complete.
Unit not switched on.
No power to machine.
Not enough time to dry.
Poor air movement in room.
Excessive moist air infiltration.
Room air is dry.
Room temperature is too low.
Filter is clogged.
Coils are clogged.
BD2500 LGR Dehumidifier
Model F413-230V EU/UK
31.8 × 45.7 × 54.6 cm
28.6 kg
410A
3.5 amps at 26.7°C/60% RH
.81kW / 230V / 50Hz
7050 BTU
285 CMH
38 L/day 26.7°C/60% RH
1–38°C
Does not exceed 70 dB
CE
S O L U T I O N
Purge unit before moving. See "At the End of the Job."
Switch unit on.
Plug in unit; check power cord connection at wall outlet.
Make sure "Humidistat" is OFF.
Allow more time for drying.
Increase air movement with air movers.
Seal off area to reduce infiltration.
Make sure "Humidistat" is OFF.
Confirm humidity level with hygrometer.
Increase room temperature.
Check filter. Replace as necessary.
Check coils. Clean as necessary.

PARTS INCLUDED

12 m drain hose with quick-connect fitting.
7.6 m power cord.
1 air filter
FILTER REORDERS
Air filter part no. F583 (24 pack)
OPTIONAL
Duct Attachment Kit (F530)
ADDITIONAL PRODUCT INFORMATION and current
documentation is available at
international.legendbrands.net.
FOR PARTS AND SERVICE contact your local distribu-
tor or Dri Eaz at +1 360 757 7776 – international.legend-
brands.net.
9 Legend Brands Holdings Ltd.