ORKS directly into matching grounded receptacle. Dri-Eaz refrigerant dehumidifiers operate by pulling moist air in across a •Do not use adaptor very cold evaporator core. The moisture condenses (freezes) on the coil. At intervals, the machine will go into defrost mode, warming the frost back Keep wiring and motor dry.
Managing temperature rise Dri-Eaz dehumidifiers warm the air as they remove moisture. Optimal drying temperatures range from 68-85° F (20-29° C) The most accurate way to monitor temperature is with a thermo-hygrometer;...
JOB HOURS steadily. 2. Then press the CLEAR key to re-set the numerals to 00000. 3. Press DISPLAY again to re-start the display cycle. NOTE: the TOTAL HOURS reading cannot be re-set. 07-01480C LW 04-13 Copyright 2007 Dri-Eaz Products, Inc.
Before Each Use • Inspect the electrical cord for damage. Look for fraying, cuts, etc. Do not use the unit if you find any. Call Dri-Eaz for the nearest Service Center. ER 9 Check for obstructions or •...
Page 6
2. Let dry and put back in place. Annually Have the pump system inspected. 1. Call a the Dri-Eaz Service Department, and they’ll help locate a Service Center near you 1-888-867-3235. 2. To inspect the pump system yourself, use the detailed instruction located at www.dri-eaz.com in the Service section.
33° - 90° F (1° - 32° C) POWER 115V 5.6 AMPS COMPRESSOR TYPE 5,595 BTU ROTARY CORD LENGTH 25 FT (7.6 M) DEFROST TYPE HOT-GAS BYPASS SAFETY MARKS PROCESS AIR 160 CFM (272 CMH) 07-01480C LW 04-13 Copyright 2007 Dri-Eaz Products, Inc.
Need help?
Do you have a question about the Evolution 115v and is the answer not in the manual?
Questions and answers