Dri-Eaz DrizAir F232-A GG Owner's Manual

The DrizAir Dehumidifier reduces humidity in enclosed structural environments by removing
water vapor from the air. The DrizAir is engineered to be rugged, durable and highly port-
able, making it ideally suited for construction, remodels, water damage restoration, and
other applications requiring temporary, high-performance dehumidification.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S

SAFETY INSTRUCTIONS

WARNING
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
• Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
• Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
• The unit must be operated on a 115V/60 Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Keep motor and wiring dry.
• Do not attempt to repair the unit. For Authorized
Service Centers, call Dri–Eaz at 800-932-3030.
BEFORE YOU BEGIN
Unpacking your unit
Retain all packing material and boxes for possible
equipment returns.
Warranty registration
Visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using,
maintaining or servicing your equipment, as well as to
contact you in case we have important safety information
07-01712C 2010-10 Warranty 07-00420
Owner's Manual
DrizAir® Dehumidifier 115V (F232-A GG)
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 www.dri-eaz.com
concerning your Dri-Eaz product. If you determine
service is required, have your equipment model, serial
number and original proof of purchase available and call
your distributor for assistance with obtaining a return
material authorization (RMA).
INTRODUCTION
Dehumidifiers reduce humidity in enclosed structural
environments by removing water vapor from the air. With
proper use, the DrizAir can help dry carpet, carpet pad,
floors, walls, building contents and more. Using
dehumidifiers can also help prevent secondary damage
caused by high humidity. For best results, use the
DrizAir with Dri-Eaz TurboDryer® airmovers placed
around the perimeter of the room to distribute heat
energy and release moisture from wet surfaces into the
air.
How the DrizAir dehumidifier works
Dri-Eaz refrigerant dehumidifiers operate by pulling
moist air in across a very cold evaporator coil. The
moisture in the air condenses on the coil. In certain
conditions, the machine operates in defrost mode,
warming any frost accumulated on the evaporator coil
back into water. The water collects in a tray and is
pumped out through a hose.
IMPORTANT: Before moving the unit, make sure there's
no water in the pump. See how to use the PURGE
function under "How to use the control pad" on page 2.

POSITIONING A DEHUMIDIFIER

For best results, operate your dehumidifiers in an
enclosed area, as this creates a drying chamber. Close
all doors and windows that open to the outside to
maximize the unit's water removal efficiency. Also, keep
traffic though the drying chamber to a minimum. Place
your DrizAir dehumidifier against a wall, away from
obstructions, and keep it away from anything that could
block airflow into and out of the unit.
1 Dri-Eaz Products, Inc.