Troubleshooting; Specifications; Parts Included - Dri-Eaz F413-230V Owner's Manual

TROUBLESHOOTING

F A U L T
Water drips out Unit was unplugged before
when moving unit purging was complete.
Unit does not Unit not switched on.
operate No power to machine.
Not enough time to dry.
Unit operating,
Poor air movement in room.
but room not dry
Excessive moist air infiltration.
Room air is dry.
Unit collects too Room temperature is too low.
little water Filter is clogged.
Coils are clogged.
If the problem you are experiencing is not listed here, call your local distributor or contact
our Service Department toll-free at +44 (0)1908-611-211 or 0800 542 9609for further assistance.

SPECIFICATIONS

Name
Dimensions (W × H × D)
Weight (w/ cord & hose)
Refrigerant
Amps
Power
Compressor rating
Air movement
Water removal
Operating temperature range
Safety
Specifications are subject to change without notice. Some values
may be approximate.
07-01899B F413-230V EUUK 2013-12
Warranty 07-00427 DoC 07-00289
C A U S E
Revolution LGR Dehumidifier
Model F413-230V EU/UK
31.8 × 45.7 × 54.6 cm
29.5 kg
410A
3.5 amps at 26.7°C/60% RH
.782kW / 230V / 50Hz
7050 BTU
285 CMH
38 L/day
26.7°C/60% RH
1–38°C
CE
S O L U T I O N
Purge unit before moving. See "At the End of the Job," p. 4.
Switch unit on.
Plug in unit; check power cord connection at wall outlet.
Allow more time for drying.
Increase air movement with air movers.
Seal off area to reduce infiltration.
Confirm humidity level with hygrometer.
Increase room temperature.
Check filter. Clean or replace as necessary.
Check coils. Clean as necessary.

PARTS INCLUDED

12 m drain hose with quick-connect fitting.
7.6 m power cord.
3M™ HAF High Air Flow filter part no. F372 (24 pack)
OPTIONAL
Duct Attachment Kit (F530)
ADDITIONAL PRODUCT INFORMATION and current
documentation is available at www.dri-eaz.co.uk
FOR PARTS AND SERVICE Dri-Eaz at +44 (0)1908-
611-211.
Visit www.dri-eaz.co.uk and register your purchase to
ensure you receive any important product releases.
7 Dri-Eaz Products, Ltd.