References; Location Of Controls; Front Panel - RCA VR689HF User Manual

References

Location of Controls

Front Panel

POWER
VIDEO IN
EJECT
INPUT
M
O
L
N
O
TV • VCR
R
AUDIO IN
Control Door Open
AUDIO IN L•MONO and R Jacks
Receives audio signals from another component,
like a VCR or camcorder when it is connected to
these jacks.
Attach a component that is not stereo to the
L•MONO jack to hear sound on both channels.
Select L2 to record from these jacks.
CHANNEL/
Selects next higher or lower channel in the VCRÕs
channel memory.
Adjusts tracking when a tape is playing.
EJECT
Press when the VCR is stopped to eject the
cassette.
INPUT
Turns the line input on or off. L1 or L2 appears in
VCRÕs display panel and
VIDEO1 or VIDEO2 appears on the TV screen.
Line input refers to the signal coming from the
component connected to the audio/video input
jacks on the back (L1) or front of the VCR (L2).
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of
unwanted scenes.
PLAY
Plays a tape.
CHANNEL
TRACKING
Remote Sensor
Up or Down
TRACKING
Tape Compartment
POWER
Turns the VCR on or off.
RECORD
Starts VCR recording.
Used for express recording (XPR).
Remote Sensor
Receives signals from the remote control. Aim the
remote at this sensor with no objects between them.
Shuttle Dial
Rewinds and fast forwards the tape when the VCR
is stopped.
Plays the picture in variable-speed slow motion
during play pause.
Searches the picture in forward and reverse during
playback.
STOP
Stops the normal functions such as record,
playback, rewind, fast-forward, or pause.
TV•VCR
Switches the picture signal so that it either comes
from the VCR or the TV channel.
VIDEO IN Jack
Receives video signals from another component,
like a VCR or camcorder, when it is connected to
this jack.
Select L2 to record from this jack.
PLAY
STOP
PAUSE
RECORD
Shuttle Dial
45