Table of Contents
Advertisement
Playing a Tape
Using the Playback Features
Auto Repeat Feature
The VCR will automatically repeat a segment of tape.
1. Locate the beginning of the segment you want the VCR to
2. Press DISPLAY to display the time counter, and press CLEAR
3. Press MENU•PROG on the remote to see the VCR MAIN MENU
4. Press 6 to display the PREFERENCES menu.
5. Press 8 to display the AUTO REPEAT menu.
6. Use the number buttons to enter the length of time (in hours
7. Press MENU•PROG to remove the menu from the screen.
8. To stop auto repeat, display the AUTO REPEAT menu and
Pause for Stop Action
This feature stops the tape in action and allows you to examine the details of the scene. Stop
action works best for tapes recorded in the SP and SLP speed.
1. Press PAUSE during playback to stop the action.
2. Press TRACKING up or down to reduce any jittering of the
3. Press PAUSE or PLAY to return to playback.
Picture Search
You can search a picture during playback by fast forwarding or rewinding the tape. Sound is
turned off during picture search. The picture is best for tapes recorded in the SP or SLP speed.
Fast Forward Search
1. Press FF on the remote or turn the SHUTTLE DIAL clockwise
2. To return to playback, press FF on the remote, PLAY, or turn
Rewind Search
1. Press REW on the remote or turn the SHUTTLE DIAL
2. To return to playback, press REW on the remote, PLAY, or turn
repeat, and press STOP.
to reset it to 0:00:00.
on the TV screen.
and minutes) of the segment you want the VCR to repeat.
The VCR will play the tape until the specified counter reading
is reached, rewind the tape and replay the segment over and
over.
press CLEAR or eject the cassette.
STILL appears in the VCRÕs display panel.
picture.
The VCR will automatically switch from stop-action playback
to stop after a few minutes.
toward FWD on the VCR to search forward at a faster-than-
normal speed.
the SHUTTLE DIAL again.
counterclockwise toward REW on the VCR to search in reverse
at a faster-than-normal speed.
the SHUTTLE DIAL again.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language/Langue
8 Audio
0 Exit
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
ON
3 Auto TV/VCR:
ON
4 Front Panel:
AUTO
5 CA Marking:
ON
6 CA Playback:
AUTO
7 CA Display:
BLUE
8 Set Auto Repeat
0 Exit
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to -:--
(h:mm)
Press MENU to exit
25
Advertisement
Table of Contents
