RCA VR650HF User Manual page 6

First Things First
Step 1: What's in the Box?
The following items come packed in the box:
• VCR
• Remote control
• RF coaxial cable
• 3 AAA Batteries
STEP 2: Install Batteries In the
Remote Control
Follow these steps whenever you need to install or change the
batteries in your VCR remote.
1. Remove the cover of the battery compartment.
2. Place the batteries into the remote's back panel. Match the
positive (+) and negative (–) ends of each battery to the
diagram inside the battery compartment.
3. Replace the cover.
STEP 3: Connect your VCR
If you connect your VCR to your home antenna or cable system
and then to your TV, use the VCR's ANT. IN and RF OUT jacks for
a good signal as shown to the right.
If you have a TV with AUDIO/VIDEO jacks, use the jacks for a
better connection. Refer to the section, Connections, toward
the back of the manual, for additional connection options.
STEP 4: PLUG IN THE VCR
Your VCR's power cord has a plastic band strung through the
blades. Match the wide blade of the power cord to the wide slot
in the AC outlet. Be sure to insert the plug completely.
4
POWER
STOP
EJECT
CH
CABLE, CABLE BOX, OR ANTENNA
VCR
AUDIO
CH3 CH4
TV
PLAY
REC
ITR
P/STILL
VHF
UHF
VIDEO
IN FROM ANT
OUT
OUT TO TV
IN
LINE 1
CABLE/
ANTENNA