Index Search; Go-To Search - RCA VR324 User Manual

Using the Playback Features
Index Search
The VCR has a "VHS Index Search System" that automatically records an
index mark on the tape every time you stop and start recording. During
playback you can locate the program you want to play by the number of
index marks.
The VCR will automatically locate the index number you select. The VCR
will search forward or reverse from the location you are on the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote to display the INDEX SEARCH
menu on the TV screen.
3. Press two number buttons to enter the number of index marks
you want the VCR to search.
4. Press F.FWD to search forward or REW to search in reverse.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR.
* A mark too close to your location on the tape.
* The mark at the beginning of a recorded segment of five
minutes or less.
- The first index mark on the tape when you start at the
beginning of the tape.
Go-To Search
The VCR will search for the time counter reading you select and
automatically begin playing back the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote twice to display the
GO-TO SEARCH menu on the TV screen.
3. Press number buttons to enter the hour(s) and minute(s) of the
time counter reading you want the VCR to search.
Press CLEAR to correct an entry.
4. Press F.FWD to search forward or REW to search in reverse for
the time counter reading you entered.
5. Press STOP to stop go-to searching.