Table of Contents
Advertisement
required rotation position. Push the trigger and the
drill will start to rotate (See Fig.B).
2. THE DRILL STOPS BEFORE THE SCREW IS
COMPLETELY TIGHTENED. WHY?
Verify the torque position of the Torque Adjustment
Ring, you can find the Torque Adjustment Ring
between the Chuck and the drill body. Position 1 is the
lowest torque (screw driving force) and position 18
is the highest torque (screw driving force). Position
is for drill operation. Position
operation.Regulate the Torque Adjustment Ring to a
higher position to reach the best result (See Fig.E).
3. I CAN NOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
The battery can be inserted into the charger only in
one direction. Turn the battery around until it can be
inserted into the slot, the red LED Light should turn on
when the battery is charging.
4. REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES
Charging time problems, as above, and having not
used a Battery Pack for a prolonged time will reduce
the Battery Pack working time. This can be corrected
after several charge and discharge operations by
charging & working with your drill. Heavy working
conditions such as large screws into hard wood will
use up the Battery Pack energy faster than lighter
working conditions. Do not re-charge your Battery
Pack below 0
C and above 45
o
performance.
MAINTENANCE
Remove the Battery Pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
Lithium-Ion cordless
hammer drill
is for hammer drill
C as this will affect
o
WX366.3 WX366.4 WX366.5 WX366.9
DECLARATION OF
CONFORMITY
We,
Positec Power Tools (Europe) Ltd, PO Box 6242,
Newbury, RG14 9LT, UK
Declare that the product,
Description WORX Cordless Hammer Drill
Type WX366 WX366.1 WX366.2 WX366.3
WX366.4 WX366.5 WX366.9 (3-designation of
machinery, representative of Hammer drill)
Drilling
Function
Complies with the following Directives,
2006/42/EC
2011/65/EU
2014/30/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-1
EN 60745-2-2
The person authorized to compile the technical file,
Name Jim Kirkwood
Address Positec Power Tools (Europe) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
2017/12/8
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P . R. China
WX366 WX366.1 WX366.2
11
Advertisement
Table of Contents
